Jump to content

Volcano Vaporizer Bags


Recommended Posts

what if you 3d printed the mouthpiece with a locking design so you could replace bags easily?

 

like it comes apart, you put the edges of the bag around the seal and then just push/lock it back together?

 

or can you explain the mech that is trouble?

Pretty much what you described. Trying to bunch the bag up evenly around the center piece. 

Link to comment
Share on other sites

whats happening to your bags in 2 weeks? are they ripping on something? holes? whats going on?

From the bag getting crinkled up so many times it eventually will get a hole in it and leak.

 

They have a pretty good set up to rebuild them. It's a plastic ring with an o ring that snaps into the housing. You use a zip tie on the other end.

Link to comment
Share on other sites

use one of those boxed wine bags. just figure out the nozzle size...

That could work!

 

I dont have a volcano, I have a vapir one, it came with lil bags, I use large kitchen garbage bag's, the vapir one has a hose to fill the bags, I take and duct tape a hose onto the end of garbage bag and fill it up, I use one of them over sized golf t's to put in the end between hits, and I can get a long time out of each one I make,  I still have to original bags that came with it, but they are to small and I have to fill it a few times, so that is why I made the garbage bag one, it is realy a hit if you have a pt get together!

 

as far as the wine bags I would think the hose that comes with most whips will fit it!  If they were bigger I would use them, they are a much stronger material than garbage bags!

 

Peace

Link to comment
Share on other sites

That could work!

 

I dont have a volcano, I have a vapir one, it came with lil bags, I use large kitchen garbage bag's, the vapir one has a hose to fill the bags, I take and duct tape a hose onto the end of garbage bag and fill it up, I use one of them over sized golf t's to put in the end between hits, and I can get a long time out of each one I make,  I still have to original bags that came with it, but they are to small and I have to fill it a few times, so that is why I made the garbage bag one, it is realy a hit if you have a pt get together!

 

as far as the wine bags I would think the hose that comes with most whips will fit it!  If they were bigger I would use them, they are a much stronger material than garbage bags!

 

Peace

Those trash bags are not food grade especially when heated. Use an oven bag. 

Link to comment
Share on other sites

use one of those boxed wine bags. just figure out the nozzle size...

I tried a wine bag a few days ago, my normal whips wont fit on the mouth peice, I did try and hot glue it on there, not enough room to get a good hold, they are major thick leak proof bags, the on off spout is leak free with air, so I took one of my old air hose's from my fish tank bubbler and it fit inside the hole of the shut off nozzle, but the hose was not big around enough to take the vape as fast as the surgical whip lines, I started to fill it and within 30 sec's my whole vapir one was smoking major, I shut it down, pulled the hose and turned it back on to give it the cool off period they require, it vaped the mm gone in 30 seconds, so in the trash in went, the bag that is, now what am I gonna do with all this wine i poured into bottles :yahoo-wave:

 

I will stick to my garbage bag or the bags that came with it, I like to just use it and let it blow into my mouth, no bag required.  so im gonna chauk off the wine box bags!

 

Peace

Edited by phaquetoo
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...